How Much Do Kitchen Cabinets Cost in 2026?
Kitchen cabinets cost between $80 and $180 per linear foot for stock ready-to-assemble (RTA) lines, and $150 to $400+ per linear foot for factory-assembled semi-custom cabinets in 2026. A complete 10x10 kitchen (about 20 linear feet of cabinets) typically runs $2,500-$7,500 at direct-to-consumer pricing, before countertops and installation.
Key 2026 Cabinet Cost Statistics
- A 30" single-door base cabinet in a mid-grade assembled line sells for $328.80 at Closeout Kitchens (JSI Amesbury B30) — comparable big-box special-order cabinets often list 30-50% higher.
- A 36" sink base cabinet starts at $269.80 (CNC Country Oak SB36) and tops out around $349.98 (CNC Broadway SB36) across entry and mid lines.
- A 30"W x 30"H wall cabinet ranges from $342.20 (Fabuwood Galaxy/Luxe) to $417.60 (Fabuwood Fusion, Luna, Onyx) depending on door style.
What Is the Average Cost of Kitchen Cabinets in 2026?
For a typical 10x10 kitchen with roughly 20 linear feet of upper and lower cabinets, expect these all-in cabinet budgets at direct pricing:
- Entry-level stock lines (e.g., CNC Country Oak): $2,500-$4,000
- Mid-grade all-plywood shaker lines (e.g., Fabuwood Galaxy, JSI Amesbury): $3,500-$6,000
- Upgraded semi-custom lines with soft-close rollouts and specialty cabinets: $5,500-$9,000+
National cost guides put the full range much wider — showroom and custom cabinetry can exceed $1,000 per linear foot — but buying direct from a closeout or wholesale dealer like Closeout Kitchens in Howell, NJ keeps most full kitchens under $7,500 in cabinets.
How Much Does Each Type of Cabinet Cost?
Real 2026 prices from the Closeout Kitchens catalog:
| Cabinet | Example SKU | Price |
|---|---|---|
| 36" sink base (2 doors) | CNC Country Oak SB36 | $269.80 |
| 30" base, 1 door + 1 drawer | JSI Amesbury B30 | $328.80 |
| 30"W x 30"H wall cabinet | Fabuwood Galaxy W3030 | $342.20 |
| 30" base with soft-close rollouts | JSI Amesbury B30BSCRT | $517.20 |
| 30" three-drawer base | JSI Amesbury DB30 | $579.60 |
| 18" x 84" tall pantry | JSI Amesbury WP1884 | $506.40 |
What Factors Drive Kitchen Cabinet Prices?
- Box construction. All-plywood boxes cost 10-20% more than particleboard but resist moisture and hold screws better.
- Door style. Within the same Fabuwood line, moving from a basic shaker (Galaxy, $342.20 for a W3030) to a premium door (Onyx, $417.60) adds about 22%.
- Drawers vs. doors. A 30" three-drawer base ($579.60) costs 76% more than the equivalent single-drawer base ($328.80) because drawer boxes and glides are the most expensive components.
- Interior upgrades. Soft-close rollout trays add roughly $150-$200 per base cabinet.
- Assembled vs. RTA. Factory assembly adds cost per box but saves hours of labor — see our RTA vs. assembled comparison.
How Can You Save Money on Kitchen Cabinets?
- Buy direct from a wholesale/closeout dealer. Skipping the showroom typically saves 30-50% versus retail special-order pricing.
- Choose a stock shaker line. White and gray shaker doors are produced at the highest volume and carry the lowest per-foot cost.
- Limit drawer bases. Use one or two drawer stacks where you need them instead of throughout the kitchen.
- Measure carefully before ordering. Returns and reorders are the most common budget-killer — see How to Measure Your Kitchen for Cabinets.
Common Questions About Kitchen Cabinet Costs
How much do kitchen cabinets cost for a 10x10 kitchen?
A 10x10 kitchen needs about 20 linear feet of cabinets. At direct pricing that is $2,500-$4,000 in an entry stock line, $3,500-$6,000 in a mid-grade all-plywood shaker line, and $5,500-$9,000+ with semi-custom upgrades.
Is $5,000 enough for kitchen cabinets?
Yes. $5,000 covers a full 10x10 kitchen in a mid-grade all-plywood shaker line such as Fabuwood Galaxy or JSI Amesbury when you buy direct, including a sink base, drawer base, and standard wall cabinets.
Why are drawer base cabinets so much more expensive?
Drawer boxes, undermount soft-close glides, and extra machining make a three-drawer base cost 60-80% more than a door base of the same width. Example: $579.60 for an Amesbury DB30 versus $328.80 for the B30.
Are assembled cabinets worth the extra cost over RTA?
If you value your time or are paying an installer by the hour, usually yes — factory assembly eliminates 30-60 minutes of build time per cabinet. DIYers on a tight budget often prefer RTA.
Do cabinet prices include countertops and installation?
No. Cabinet prices cover the boxes, doors, and hardware only. Budget separately for countertops ($40-$100+ per square foot installed) and installation ($100-$300 per cabinet if hired out).
When is the cheapest time to buy kitchen cabinets?
Closeout and overstock inventory is discounted year-round, but selection is deepest after manufacturers refresh lines — typically late winter and mid-summer. Buying whatever is currently in closeout stock always beats waiting for a retail sale.
Sources
- Closeout Kitchens live catalog pricing, July 2026 — closeoutkitchens.com
- Manufacturer price lists: Fabuwood, JSI Cabinetry, CNC Cabinetry (2026)
Published by Closeout Kitchens, Howell, NJ — wholesale kitchen cabinet dealer serving Monmouth and Ocean County. Updated July 2026.